building services software

HomeProductFeaturesServicesFAQNewsAbout UsContact       

October 2008
Xetec Limited are appointed as reseller for elcoCAD Building Services software in Ireland and Northern Ireland. The addition of elcoCAD compliments the existing software packages available from Xetec for electrical engineers, consultants and contractors.
April 2004
There has been a lot of talk about object oriented CAD, building information models (BIM) and interoperability. This technology marks a step change in the capabilities of CAD software but what's in it for engineers ?

building services cad

The construction industry has moved rapidly from being behind other sectors in use of IT, to increasingly demanding of software on offer. CAD has been viewed as an expensive drawing board, and these days it doesn't really offer all that engineers and their clients require.

The need for high quality well integrated documentation has become more and more pressing and the limitations of pure CAD systems increasingly apparent.

Today's building industry demands the kind of transparency and flexibility which goes way beyond traditional CAD offerings. Additional to this two current trends,facilities management and 3d, cannot be addressed by standard drafting packages without a specialised and well integrated application.

The ideal would be a system which offered a range of functionality, for example automatic positioning, alignment of luminaires, loudspeakers, automatic creation of cable containments in 2d and 3d, and an automatically generated drawing legend. But more than that it should include a project and drawing management facility, and have the ability to automatically transfer relevant drawing data, like title, indices and approval status into the drawing file.

All of this is a vast improvement on the standard drawing-board and has become standard in more advanced CAD applications for building services. Unfortunately users often find that these systems take some time to get to grips with. However, there is a development from Germany which may offer a solution, elcoCAD R4.

This offers a number of useful developments and is achieved partly with built-in software, and partly by interfacing with other packages. For lighting calculations elcoCAD R4 comes with bidrectional interfaces to DIALux and RELUX. In elcoCAD R4, the shape of the room is transferred from the floor plan to the lighting calculation system, and the exact position of the luminaries, including their 3d co-ordinates, dimensions and load are automatically transferred back to the floor plan.

The system supports ETS/2, the official software package for European Installation Bus (EIB) technology, by including data exports of all EIB items. Microsoft Word and Excel are used for the creation of lists and reports and a configurable Excel import module is included, for importing specification sheets into elcoCAD's project database.

EPI is a bidirectional interface that allows data exchange with software packages for electrical calculations (BS 7671) for protection, cable, discrimination etc. If you need to create circuit diagrams elcoCAD R4 is shipped with an interface to ePLAN 5 and other packages for electrical control diagrams. Electric circuit information is automatically generated from the electrical installation extracted from the floor plans and can be printed as a distribution schedule.

A big issue in electrical installation engineering is always cable routing. An important part of the system's philosophy is stepwise refinement which enables the user to add information at various levels of detail as the project progresses. For example the built-in cable manager allows the user to define basic structure of distribution boards and circuits. In the first step the user selects the required devices by simply clicking on them, thus connecting them into the desired circuit. Cable length, the number of devices on the electric circuit and the cumulated load are displayed online.

Having defined these basic structures, the system now has enough information to generate all the output. If it is neccessary to document the exact cable routes or to get the precise cable and conduit quantities, there is a function to draw 2d/3d polylines and link them to the cable manager. The system offers an optimised algorithm for finding the shortest connection between two points. This supports networks with loops as well as user-defined redirection, where a specific connection is disallowed.

The software is prepared for all common cable systems while other systems can be configured manually. Becaus of its flexible design elcoCAD R4 can be adapted to nearly any kind of requirement - and flexibility is a very important issue. An estimated 80% of the design process in the building industry involves altering completed work. elcoCAD caters for such changes by dynamically updating the online-database; adjusting length or location changes automatically, whenever the user moves a socket, luminaire or cable.

Unlike any other industry, the construction industry has a tendency to resolve problems on site, resulting in increased costs for coordination. For this reason 3d and clash detection have become hot topics.Unfortunately 3d-modelling is a time consuming and expensive technique if you are using a basic CAD product. While the user is working strictly in 2d, newer software will generate a complete 3d model in the background, that can be used for wall elevations and 3d analysis. The brand new interface to Navisworks 3 can be invoked for sophisticated visualisation, walkthroughs and automatic clash detection.
March 2004
Adding value to cad
Contractors are turning on to the benefits of cad.
Oliver Hannappel, Managing Director of elcoCAD UK Limited, explains how clash detection and 3D models are coming to a screen near you.

In the early days of computer aided design (cad), it was often said: "CAD is just too expensive to use it as a drawing board." Driven by the growing demands and higher expectations of the building industry, this statement seems to be topical once again.

Building Services Software
2D and 3D floor plan generated in elcoCAD R4.

The need for high quality, well integrated documentation has become more and more pressing and the limitations of pure cad systems have become increasingly apparent. Today's construction industry, particularly the electrical installation sector, demands the kind of transparency and flexibility that goes way beyond traditional cad offerings. In addition to this, the two current big trends - facilities management and 3D - can obviuosly not be addressed by standard drafting packages without a specialised and well integrated application.
elcoCAD R4 is one such solution. Currently it is the market leader in german-speaking Europe - a UK version is now available.
So what kind of functionality is offered by such a system ? It provides all the neccessary symbols and drawing functions, for example automatic positioning, alignment of luminaires, loudspeakers, automatic creation of cable containments in 2D and 3D, and an automatically generated drawing legend. More than that, elcoCAD R4 includes a project and drawing management facility, and has the ability to automatically transfer relevant drawing data, like title, indices, approval status etc into a dwg file. All of this is a vast improvement on the standard drawing board.

Interfaces to cae tools
As with many existing tools, computer aided engineering (cae) functionality is provided partly by built-in modules and partly using interfaces to existing industry standard software packages. For lighting calculations, elcoCAD R4 comes with bidirectional interfaces to the two very popular products DIALux and RELUX. In elcoCAD R4, the shape of the room is transferred from the floor plan to the lighting calculation system, and the exact position of the calculated luminaries, including their 3D-coordinates, dimensions and load are are automatically transferred back to the floor plan. The system supports ETS/2, the official software package for European Installation Bus (EIB) technology by including data exports of all EIB-items, including software address, location and application data. Microsofr WORD and Excel are used for the creation of lists and reports and a configurable EXCEL import module is included for importing specification sheets into elcoCAD's project database.
EPI is a bidirectional interface that allows data exchange with software packages for electrical calculations (BS 7671) for protection, cable, discrimination etc. If you need to create circuit diagrams, elcoCAD R4 is shipped with an interface to ePLAN 5 and other packages for electrical control diagrams. Circuit information is automatically generated from the electrical installation extracted from floor plans.


A block diagram for a fire detection system.

For fire protection systems, the system provides calculation and visualisation of detectors (BS 5839), automatically, generates block diagrams, cable lists, detector lists etc.
Cable support systems, such as trunking systems, conduits etc can be generated automatically in 2D and 3D using the powerful elcoCAD info line technology, which also supports BESA terms and other algorithms for dimensioning the containments.
A big issue in electrical installation is cable routing. An important part of the system's philosophy is "stepwise refinement", which enables the user to add information at various levels of detail as the project progresses. For example, the built-in cable manager allows the user to define the basic structure of distribution boards and circuits. In the first step the user selects the required devices by simply clicking on them, thus connecting them into the desired circuit. Cable length, the number of devices on the circuit and the cumulated load are displayed online and can be checked against user-defined maximum values.
Having defined these basic structures, the system now has enough information to generate all the output mentioned above. If it is neccessary to document the exact cable routes or get precise cable and conduit quantities, there is a function to draw 2D/3D polylines and link them to the cable manager. The systems offers an optimised algorithm for finding the shortest connection between two points. This supports networks with loops as well as user-defined redirection, where a specific connection is disallowed.
The software is prepared for all common cable systems (power engineering and communications), while other systems can be configured manually. Because of it's flexible design, elcoCAD R4 can be adapted to nearly any kind of requirement - this flexibility is a very important issue.
An estimated 80% of the design process in the building industry involves altering completed work. elcoCAD caters for such evolutionary change by dynamically updating the online database; adjusting length or location changes automatically, whenever the user moves a socket, luminaire or cable.

3D
Unlike any other industry, construction has a tendency to resolve problems on site, which can result in increasing coordination costs. This is why 3D is such a big trend in the cad enviroment and clash detection has become such a hot topic. Unfortunately 3D-modelling can be a very time-consuming and expensive technique.


Automatic clash detection with Navisworks 3.

While the user is working strictly in 2D, elcoCAD R4 will generate a complete 3D model in the background that can be used for wall elevations and 3D analysis. A new interface to NavisWorks 3 can be invoked for sophisticated visualisation, walk-throughs and automatic clash detection.

High end cad systems can also help to achieve cost transparency and control. elcoCAD R4 usese it's online object database to keep track of all quantities that are added to the cad drawings. These quantities can be handed over to Excel to generate a bill of material at any given time, without even having to to save the current dwg file. Quantities can also be linked to to specification sheets in a 1:n relation. If the specification sheets carry information about unit rates, costs and time the system will multiply these values with the cad quantities and provide reports that support cost estimation as well as plan/actual comparisons.

Compatibility is a key feature in the AEC enviroment. At elcoSystems, we believe that the issue of compatibility cannot be addressed except through new cad standards like IFC. As long as the de facto standard for drawing exchange is dxf/dwg, users will face some imminent system problems and these problems need to be solved.
DXF/DWG files most commonly contain basic geometric primitives, but no objects. If the user wants to reuse electrical installation symbols there are two choices: abandon the option of using a high-end cad system or do all the drawing work once again. Both options are simply unacceptable. elcoCAD's click and learn modules are based on elcoCAD cognitive object technology (ECOT), and are able to learn a new symbol by just one mouse click. All symbols of that same type can then be automatically transformed into elcoCAD objects in the current or any other drawing, without changing the original geometry.
The new symbol library created by learning the symbols on one occasion can then be used to produce drawings in this cad standard (layers, colours, symbols etc). Considering the increasing compatibility demands that arise from facilities management cad specifications, this is a hugely beneficial feature of click and learn technology.
February 2004
Widely used in Europe, the elcoCAD R4 computer aided drawing package was launched in the UK.

Electrical contractors now have a new computer aided design (cad) option: elcoCAD R4 from elcoSystems UK. elcoCAD R4 is a market leader in Europe in cad solutions for electrical installations.

3D Building image with services

Based on AutoCAD, it is used by over 700 European engineering companies. It offers project and drawing management facilities; bi-directional interfaces to DIALux and Relux; a configurable Excel import-interface; and can generate reports in Microsoft Word and Excel.
It has a BS-compliant symbol library and offers routines for symbol placement and arrangement. Features include: automated cable routing; the generation of bills of quantity; plan/actual comparison; cost estimation; 3d-visualisations; automatic generation of block diagrams and cable lists; and an automatically created drawing list. An integrated click and learn technology allows the adaptation of cad standards and data exchange to fm systems.
 
 
 
 
January 2004
elcoSystems UK Ltd is set to introduce elcoCAD R4, its high-end CAE/CAD solution for electrical installation, into the UK market at the beginning of 2004. Based on the the building industry standard AutoCAD, elcoCAD R4 is already being successfully used by over 700 consulting engineering companies in Europe. These are made up of commercial, domestic and electrical contracting companies as well as large corporations like ABB, Bosch Telecom, Minimax and Siemens, running company-wide licenses.
elcoCAD R4 offers project and drawing management facilities, bi-directional interfaces to DIALux and RELUX, a configurable EXCEL import-interface and generates lists and reports in WORD and EXCEL. The product comes with a BS compliant symbol library and offers sophisticated routines for symbol placement and arrangement. Automated cable-routing, the generation of a bill of quantity, plan/actual comparison, cost-estimation, 3D-visualisation, automatic generation of block diagrams and single-line diagrams as well as an automatically created drawing legend are just a few of it's powerful features. The integrated "click & learn" technology enables the adaptation of CAD standards and allows the data exchange to Facility Management systems.
elcoCAD Uk Ltd is a subsidiary of Hannappel SOFTWARE GmbH. Hannappel SOFTWARE GmbH was established as "Hannappel Consulting Engineers" by consulting engineer Karl Hannappel in 1961 and is today the market leader for CAE/CAD 'High-End Solutions' for electrical engineering in Germany.